carbon fiber heat lamp stick

carbon fiber heat lamp stick

carbon Fiber Heat Lamp Stick: High-Density Infrared for Industrial Processes

We built this carbon fiber heat lamp stick for engineers who need a heater that’s tough, high-output, and fits where space is tight—without falling apart on the factory floor. This isn’t some household bulb. It’s a purpose-built infrared emitter, designed for fast, focused heating inside industrial equipment.

Power, Voltage, and Size—Straight to the Point

Here’s the heart of it. The lamp runs at 400V, which means it can plug into higher-voltage industrial circuits. That lowers the current on the wiring and keeps voltage drop in check over distance. The payoff? Your power supply and contactors stay cooler. Packed into a 300mm tube, it hits 2500W. That’s serious heat density. You get quick ramp-up and stable running temps, without needing a giant footprint. But with that kind of power comes a reality check. It runs hot in the immediate area, so the fixture and mounting hardware have to be rated for high temps. Plan your machine’s cooling and ventilation to keep the lamp and nearby parts in a safe zone.

Why Carbon Fiber, and Why the Right Connector Matters

The magic is the carbon fiber heating element inside a quartz envelope. Carbon fiber gives you even resistance and fast response, while the quartz tube delivers high-intensity infrared cleanly. We add a halogen gas fill to stabilize the filament and help it last longer by fighting premature burnout. The quartz coating is tuned to shape the infrared spectrum and shield the element from contaminants. And the R7s connector? Practical choice. It’s a rugged, two-pin ceramic base that handles high current and high heat. It locks in a secure, aligned connection, and you can wire it up quickly—again and again. It’s a direct swap for existing R7s heaters, so you can replace units without redesigning the machine.

Built for the Heat Tasks That Actually Matter

This setup shines in demanding thermal jobs—PET blowing, plastic welding, component drying. The infrared output zeroes in on the target, heating what you need, not the air around it. That means faster response and repeatable results. The 300mm length is just right for cramped zones where bigger heaters won’t fit. For engineers, it comes down to this: predictable heat, connections you can trust, and a build that keeps going through continuous operation. When you need intense heat in a small space, this carbon fiber heat lamp stick is the straightforward, field-proven way to get it.